Filter
Top Products
22
Getting StartedUseful InformationTroubleshootingAppendix
Hard Disk Data Erase Utility
When disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage.
Even if you erase the data or initialize the hard disk using normal Windows commands, the data can be read with some
special software. Use the hard disk data erase utility to erase the data completely.
Note that transferring of the ownership without uninstalling the commercial software will be a violation of the software’s
license agreement.
CAUTION
When the hard disk contains the Recover Pro backup data, the Recover Pro backup area is lost as well.
NOTE
Even if hard disk data erase is performed, the number of times of DVD’s region code setting will not be reset.
This utility cannot erase data for specific partitions.
Preparation
Prepare the Product Recovery DVD-ROM (included).
Remove all peripherals.
Connect the AC adaptor and do not remove it until hard disk data erase is complete.
1 Turn on the computer, and press
F2
while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
2 Press
F9
.
At the confirmation message, select [Yes] and press
Enter
.
3 Select the [Boot] menu, then select [USB CDD] and press
F6
until [USB CDD] is at the
top of [Boot priority order].
4 Set the Product Recovery DVD-ROM into the CD/DVD drive.
When the disk cover does not open
A Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
The computer will restart.
B Press
F2
while [Panasonic] boot screen is displayed.
C Set the Product Recovery DVD-ROM.
5 Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
The computer will restart.
If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User
Password.
6 Press
2
to execute [2. [Erase HDD]].
To cancel this operation, press
0
.
7 At the confirmation message, press
Y
.
8 When [<<< Start menu >>>] is displayed, press
Enter
.
The approximate time required for erasing data will be displayed.
9 Press
Space
.
At the confirmation message, press
Enter
.
The hard disk erase process starts. When the operation is completed, the “Hard disk data has been deleted.”
message will appear. If a problem has occurred during the operation, an error message will appear.
To cancel partway, press
Ctrl
+
C
. The data erasure will be up to that point.
10 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-
puter after the message “Hard disk data has been deleted.” is displayed.
The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunc-
tions or other operational errors, data may not be completely erased. There are also specialized devices that may be
able to read data that has been erased using this method. If you need to erase highly confidential data, we recom-
mend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no
responsibility for losses or damages suffered as a result of the use of this utility.
CF-W5mk2-PCSC.book 22 ページ ２００６年１０月２日 月曜日 午後１時１２分