Panasonic PT-50LC13 Projector User Manual


 
32
For assistance, please call : 1-888-VIEW PTV(843-9788)
The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen
cinema format picture.
The aspect mode changes each time the ASPECT
button is pressed.
Notes:
• When a 1080i or 720p signal is being received, the mode is set to FULL, and
aspect switching is not possible.
• When input mode is CARD, the mode is set to NORMAL, and aspect
switching is not possible.
FULL
Notes:
• However, if the mode selected does not match the aspect ratio of the input signal, the original picture quality may be affected.
• If using this projection display in places, such as cafes or hotels, with the aim of displaying programs for a commercial purpose
or for public presentation, please note that by using the aspect ratio (16:9) selection function to change the aspect ratio, you
may be infringing on the rights of the original copyright owner of that program under copyright protection laws.
• If a normal (4:3) picture is projected in wide screen, distortion may occur around the edges so that part of the picture may no
longer be visible. We recommend viewing in 4:3 mode so you can enjoy the picture as it was intended to be seen.
• When XGA and Mac 19 signal is input, the aspect will be NORMAL and
FULL only.
ASPECT Con trols
• During PC input, the mode switches between NORMAL, FULL and TRUE
only.
• When a 480p signal is being received, the mode
switches between NORMAL, ZOOM, and FULL only.
NORMAL ZOOM FULL
NORMAL FULL TRUE
NORMAL FULL
NORMAL FULL
JUST ZOOM