Panasonic PT-50LC13 Projector User Manual


 
35
Basic Operation
VCR
DVD player
This equipment can
also be con nect ed to
the rear terminals. See
Connections for details.
Turning the power on and switching input modes
Turn the projection
display on.
1
2
The input mode changes
each time this button is
pressed.
* No input mode is displayed
for terminals with no
equipment con nect ed.
3
Operate the connected equipment.
Con rming connections
A video camera uses the Input 3 terminal on the front of the projection display.
Video camera
To S-video output
or video output
To audio output
Example: Connect Input 3
Playing peripheral equipment
VIDEO 1 Signal of source connected to INPUT 1 is displayed.
VIDEO 2 Signal of source connected to INPUT 2 is displayed.
VIDEO 3 Signal of source connected to INPUT 3 is displayed.
COMPONENT 1
Signal of source connected to COMPONENT VIDEO INPUT 1 is displayed.
COMPONENT 2
Signal of source connected to COMPONENT VIDEO INPUT 2 is displayed.
COMPONENT 3
Signal of source connected to COMPONENT VIDEO INPUT 3 is displayed.
COMPONENT 4
Signal of source connected to COMPONENT VIDEO INPUT 4 is displayed.
RGB 1
Signal of source connected to RGB IN 1 is displayed.
RGB 2
Signal of source connected to RGB IN 2 is displayed.
DIGITAL IN
Signal of source connected to DIGITAL IN is displayed.
CARD
Signal of source connected to CARD SLOT is displayed.
TV
VIDEO 1 *
VIDEO 2 *
VIDEO 3 *
COMPONENT 1
*
COMPONENT 2
*
CARD
DIGITAL IN
RGB 2
RGB 1
COMPONENT 4
*
COMPONENT 3
*
Card input mode is
selected.
RGB input mode is
selected.
RGB 2
RGB 1