Filter
Top Products
Setting up
16 - ENGLISH
Getting Started
If the projector is not positioned right in front of the center of the screen, you can adjust the projected image position
by moving the Lens shift dials within the shift range of the lens.
J Adjusting the Lens shift dials
Q Horizontal shift
You can place the projector where the projector lens is up to 40% horizontally off-center from the screen and
then adjust the image position with the Lens shift dial • Horizontal.
Q Vertical shift
You can place the projector where the projector lens is up to 100% vertically off-center from the screen and then
adjust the image position with the Lens shift dial • Vertical.
Lens shift and positioning
Up to about 40%
of the projection
Up to about 40%
of the projection
Screen
Turning the dial
clockwise:
Moving to screen’s right
Turning the dial
counterclockwise:
Moving to screen’s left
Up to about 100%
of the projection
Up to about 100%
of the projection
Turning the dial clockwise:
Moving to screen’s top
Turning the dial counterclockwise:
Moving to screen’s bottom
Screen
PT-AE1000U.book Page 16 Monday, October 16, 2006 1:40 PM