Filter
Top Products
ENGLISH-27
Basic Operation
26-ENGLISH
Returning a setting to
the factory default
If you press the NORMAL button on
the remote control unit, you can
return settings to the factory default
settings. However, the operation of
this function varies depending on
which screen is being displayed.
BWhen a menu screen is being
displayed
All items displayed will be returned
to their factory default settings, and
the bar scale will appear white.
BWhen an individual adjustment
screen is being displayed
Only the item displayed will be
returned to the factory default
setting, and the bar scale will
appear white.
NOTE:
BTriangle symbols above and
below a menu bar indicate the
factory default setting. Items
which do not have these triangle
symbols cannot be returned to
the factory default setting.
Indicates the standard factory
default setting
Indicates the current adjustment
value
BThe positions of triangle symbols
vary depending on the type of
signal being input.
Using the freeze function
The picture will alternate between a still picture and a moving picture each
time the F(function) button on the remote control unit is pressed.
Still picture Moving picture
Menu operation guide
#Press the MENU button.
The MAIN MENU screen will be
displayed.
$Press the
FF
or
GG
arrow
buttons to select an item.
Selected items will be displayed
in blue.
%Press the ENTER button to
accept the selection.
The selected menu screen or
adjustment screen will then be
displayed.
(Example: PICTURE menu)
MENU
KEYSTONE
PICTURE
POSITION
SHUTTER
LANGUAGE
OPTION
SELCT ENTER
MENU
KEYSTONE
PICTURE
POSITION
SHUTTER
LANGUAGE
OPTION
SELCT ENTER
PICTURE
PICTURE MODE NORMAL
COLOR 0
TINT 0
BRIGHT 0
CONTRAST 0
SHARPNESS 0
COLOR TEMP. NORMAL
TV-SYSTEM AUTO1
SELCT ADJ ESC
&Press the
FF
or
GG
buttons to
select an item, and then press
the
II
or
HH
buttons to change
or adjust the setting.
An individual adjustment screen
such as the one shown below will
be displayed for bar-scale items.
The bar scale will turn green
when any adjustment changes
the setting from the factory set
value.
Unavailable on-screen
menu items
This projector has unadjustable
items and unusable functions
depending on the signal being input.
When an item cannot be adjusted or
a function cannot be used, the
corresponding on-screen menu
display does not appear, and the
item or function will not work even if
the ENTER button is pressed.
Returning to the
previous screen
If you press the MENU button while
a menu screen is being displayed,
the display will return to the
previous screen.
If you press the MENU button while
the MAIN MENU screen is being
displayed, the MAIN MENU screen
will be cleared.
BRIGHT 0
Select FREEZE from the FUNCTION item in the OPTION menu to use this
function. (Refer to page 38.)
PICTURE
PICTURE MODE NORMAL
COLOR 0
TINT 0
BRIGHT 0
CONTRAST 0
SHARPNESS 0
COLOR TEMP. NORMAL
TV-SYSTEM AUTO1
SELCT ADJ ESC
BRIGHT 0