Panasonic PT-AE2000U Projector User Manual


 
Getting Started
18 - ENGLISH
Connections
Read and follow the operating and connecting instructions of each peripheral device.
The peripheral devices must be turned off.
Use cables that match each peripheral device to be connected.
Confirm the type of video signals. See “List of compatible signals” on page 47.
Audio cables must be connected from each peripheral device directly to the audio reproduction system.
\
Before connecting to the projector
Connecting to COMPONENT IN/VIDEO IN/S-VIDEO IN
Connecting to COMPUTER IN/HDMI IN
NOTE:
Make sure the HDMI cable is adapted to your HDMI device for proper performance.
A compatible cable is required for an HDMI 1 080p signal.
It is possible to connect with DVI devices via a HDMI/DVI conversion adapter, but some equipment may not project the
image properly or other problems could be encountered. “Serial terminal” on page 48
DVD player Video player DVD player
To COMPONENT
video output
To VIDEO output
To S-VIDEO output
RGB signal cable
(Commercial item)
HDMI cable
(RP-CDHG100: Optional))
To HDMI output
DVD player
Computer