Panasonic PT-AE2000U Projector User Manual


 
PICTURE menu
ENGLISH - 33
Settings
Q Adjusting the image in a split window
1. Select AREA SELECT and press the ENTER
button.
The image will be frozen and the area cursor will be
displayed.
2. Press I H to move the area cursor to select the
required area and press the ENTER
button.
The selected frozen image will be displayed in a split
window.
3. Press the MENU to display the PICTURE menu on
the right.
4. Adjust the required PICTURE menu items.
The Other menu items are not available.
Sub-menu items vary according to the selected input
signal. See “Main menu and sub-menu” on page 28.
5. Press MENU/RETURN button several times to
escape from the menu.
6. Press the ENTER button.
The confirmation screen will be displayed. Select OK
to finish the adjustment.
7. Press the ENTER button.
Press the ENTER button again to return to the AREA
SELECT.
Press the RETURN button escape from the SPLIT
ADJUST mode.
You can perform more detailed image adjustment
manually.
J GAMMA
You can adjust linear intensity at 3 levels. Press I
H to increase/decrease 1 point.
Setting range: -8 to +8
J CONTRAST
You can adjust the amount of contrast in RGB
colors individually. Press I H to increase/
decrease 1 point.
Setting range: -32 to +32
J BRIGHTNESS
You can adjust the brightness in RGB colors
individually. Press I H to increase/decrease
1 point.
Setting range: -16 to +16
J NR (Noise Reduction)
You can switch the automatic noise reduction
system on/off. Press I H to select the required
setting.
ON: Automatic noise reduction
OFF: No noise reduction
J MPEG NR
You can switch the automatic noise reduction
system for MPEG format images on/off. The
system minimize block noise and mosquito noise
to eliminate jagged edges, providing an overall
smoother image. Press I H to select the required
setting.
ON: Active
OFF: Deactive
MOVE AREA GO TO SPLIT ADJUSTENTER GO TO SPLIT ADJUSTENTER
ENTER
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR TEMPERATURE
DYNAMIC IRIS
WAVEFORM MONITOR
ADVANCED MENU
SPLIT ADJUST
MEMORY SAVE
MEMORY LOAD
MEMORY EDIT
PICTURE
POSITION
LANGUAGE
FUNCTION BUTTON
LENS CONTROL
OPTION
SELECT
NORMAL
ON
OFF
RETURN
ADVANCED MENU
Levels Default setting
GAMMA HIGH 0
GAMMA MID 0
GAMMA LOW 0
RGB Default setting
CONTRAST R 0
CONTRAST G 0
CONTRAST B 0
RGB Default setting
BRIGHTNESS R 0
BRIGHTNESS G 0
BRIGHTNESS B 0
NOTE:
MPEG NR system is not available with COMPUTER/
HDMI (VGA60) signals.