Filter
Top Products
Preparation
About Your Projector
ENGLISH - 13
J Back and bottom view
NOTE:
• Do not cover the ventilation openings or place anything within 10 cm (4") of them as this may cause damage or injury.
• The projector should only be used with the attached mains lead to ensure optimum performance and avoid damage to the
projector.
Front leg adjusters
Screw up/down to adjust the
projection angle. (page 15)
Lens cover attachment hole
Security lock
Attach the shackle lock
provided with the projector.
Compatible with the
Kensington MicroSaver
Security System. (page 50)
Air filter (page 41)
Lamp unit compartment
(page 41)
Air intake port
MAIN POWER
Switch the projector on/off
(page 19)
AC IN
Connect the mains lead to
supply electronic power to the
projector. (page 19)
SERIAL
Connect a compatible cable for
controlling the projector
remotely via your computer.
COMPONENT IN
Connect YP
BPR signal cables.
COMPUTER IN
Connect an RGB signal cable
from your PC.
Connecting terminals
(page 18/page 46)
HDMI IN
Connect HDMI signal cables.
S-VIDEO IN
Connect a S-VIDEO signal
cable.
VIDEO IN
Connect an RCA composite
video cable.
http://www.pureglare.com.au