Filter
Top Products
Technical Information
ENGLISH - 47
Appendix
J Communication settings
J Control commands
J Inquiry commands
Signal level RS-232C Character length 8 bits
Sync. method Asynchronous Stop bit 1 bit
Baud rate 9 600 bps X parameter None
Parity None S parameter None
Command Control contents Remarks
PON
POWER ON
In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp ON control.
POF
POWER OFF
If a PON command is received while the cooling fan is operating after the lamp has switched
off, the lamp is not turned back on again straight away in order to protect the lamp.
IIS
INPUT
Parameter:
YUV = COMPONENT IN (YP
BPR)
SVD = S-VIDEO IN
HD1 = HDMI1 IN
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
OMN
MAIN Displaying the main menu.
OEN
ENTER Activating the selected items in the menu mode.
OBK
RETURN Returning to the previous menu or escaping from the menu mode.
OCU/OCD/
OCL/OCR
Navigation buttons
OCU = F button
OCD = G button
OCL = I button
OCR = H button
OST
DEFAULT Resetting to the factory default setting. (page 23)
OFZ
FREEZE
Freezing the projected screen.
Parameter:
0 = OFF 1 = ON
OOT
SLEEP
Setting the duration of time to turn off the power automatically. (page 39)
0 = OFF 1 = 60min. 2 = 90min. 3 = 120min. 4 = 150min.
5 = 180min. 6 = 210min. 7 = 240min.
OSH
BLANK
Turning off the projection temporarily.
Send the command to switch between ON and OFF.
Do not send the command consecutively.
OVM
PICTURE Activating the PICTURE menu. Send the command to switch menu items. (page 23)
VS1
ASPECT Switching the aspect ratio. (page 23)
VPM
PICTURE MODE
Switching the PICTURE MODE. (page 30)
Parameter:
NOR = NORMAL DYN = DYNAMIC VCN = VIVID CINEMA
CN1 = CINEMA1 CN2 = CINEMA2 NAT = NATURAL GAM = GAME
Command Control contents Parameter
QPW
Power status 000 = OFF 001 = ON
QFZ
FREEZE status 0 = OFF 1 = ON
QIN
INPUT signal status
YUV = COMPONENT IN (YP
BPR)
SVD = S-VIDEO IN
HD1 = HDMI1 IN
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
QOT
SLEEP status
0 = OFF 1 = 60min. 2 = 90min. 3 = 120min. 4 = 150min.
5 = 180min. 6 = 210min. 7 = 240min.
QPM
PICTURE MODE status
NOR = NORMAL DYN = DYNAMIC VCN = VIVID CINEMA
CN1 = CINEMA1 CN2 = CINEMA2 NAT = NATURAL GAM = GAME
QSH
BLANK status 0 = OFF
http://www.pureglare.com.au