Filter
Top Products
Powering ON/OFF
ENGLISH -
31
Basic Operation
ON(G)/STANDBY(R) indicator
The ON(G)/STANDBY(R) indicator informs you the status of the power. Conrm the status of the
<ON(G)/STANDBY(R)> indicator before operating the projector.
Indicator status Status
No illumination or ashing The power plug is not connected to the outlet.
Red
Lit
1
The power is switched off. (Standby mode)
Press <
v
/
b
> to start projection.
Slow
Flashing
2
The power is switched off. (Standby mode)
Press <
v
/
b
> to start projection.
Flashing
The projector is preparing to switch off the power.
The power is switched off after a while. (Changes to the standby mode.)
Green Lit The projector is preparing for projection or in the projection status.
1 When [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] are all set to [Off].
2 When one or more among [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] is/are set to [On].
Note
When the <ON(G)/STANDBY(R)> indicator is ashing in red, the internal fans start to operate and the projector starts
z
cooling.
<ON(G)/STANDBY(R)> indicator