Filter
Top Products
Settings
SECURITY menu
ENGLISH - 36
You can lock the MENU button function and the password will
be asked to display the menu every time.
You can change the password for MENU LOCK system to your
original.
1. Enter the original password.
Use F G I H to specify the location of the required
character.
2. Press the ENTER button.
The selected character will be displayed in the text box.
3. Repeat until finish your original text.
Select < or > and press the ENTER button to move the
cursor in the text box.
Select BS and press the ENTER button to erase a
character.
4. Select OK and press the ENTER button.
Select CANCEL or press the MENU button to return to the
previous step.
J CONTROL PANEL
You can disable the control panel buttons on the
projector body. Press I or H to switch the option.
J REMOTE CONTROLLER
You can disable the remote control buttons. Press I or
H to switch the option.
MENU LOCK
OFF Deactivate the MENU LOCK system.
ON Activate the MENU LOCK system.
NOTE:
• The factory default password is “AAAA”.
• The factory default password is valid until you change the
password in MENU LOCK PASSWORD menu.
• When the projector is initialised, the password will be changed
to the factory default setting, "AAAA".
MENU LOCK PASSWORD
NOTE:
• Change the MENU LOCK PASSWORD regularly and make it
uneasy to guess.
CONTROL DEVICE SETUP
NOTE:
• If you disable both of the control panel and remote
control buttons, you cannot return to the standby mode.
Use this function with utmost care.
• If you press a disabled button, you will be asked to
perform the security password operation. The
password screen will disappear after 10 seconds
without any operation.
ENABLE Enable the control panel buttons.
DISABLE
Disable the control panel buttons.
The confirmation screen will be
displayed. Select
OK by pressing
the I, and the
ENTER button.
ENABLE Enable the remote control buttons.
DISABLE
Disable the remote control
buttons. The confirmation screen
will be displayed. Select
OK by
pressing the I, and the
ENTER
button.