Filter
Top Products
Projecting
ENGLISH - 37
Basic Operation
Adjustment range by the lens position shift (optical shift)
Perform the lens position shift within the adjustment range.
The focus may change when the lens position is shifted out of the adjustment range. This is because the
movement of the lens is restricted to protect the optical parts. Projection position can be adjusted with the optical
axis shift based on the standard projection position in the range shown in the following gures.
Lens type
Zoom lens
Standard zoom lens, ET-DLE150, ET-DLE250,
ET-DLE350, ET-DLE450
ET-DLE080
PT-DW730E
0.6 V
0.1 H
0.1 H
Standard
projection position
Projection
screen height, V
Projection screen width, H
0.6 V
0.5 V
0.1 H0.1 H
Projection
screen height, V
Standard
projection position
Projection screen width, H
PT-DX800E
0.5 V
0.1 H
0.1 H
Standard
projection position
Projection
screen height, V
Projection screen width, H
0.45 V
0.34 V
0.1 H0.1 H
Projection
screen height, V
Standard
projection position
Projection screen width, H
* The above are the gures when the projector is placed on the oor.
Note
z
When the xed-focus lens (ET-DLE055) is attached, shift adjustment cannot be performed.