Filter
Top Products
ENGLISH - 25
Settings
DISPLAY OPTION menu
When multiple projectors are used simultaneously, you can
adjust the difference of the colours. Press I H to cycle
through the options.
You can adjust 6 colours and register the result for each of 4
types of signals, VIDEO, S-VIDEO, RGB and YP
BPR/YCBCR.
You can switch the contrast mode for operating environment.
J SCREEN FORMAT
Select the required screen format by pressing I H. The
SCREEN FORMAT setting will affect on the ASPECT
setting. See “ASPECT” on page 18.
J SCREEN POSITION
You can change the displaying position of the projecting
area. Press I H to adjust the value.
You can turn ON/OFF automatically detecting system of the
AUTO SETUP feature.
COLOR MATCHING
OFF Deactive.
3 COLORS
Adjusting RGB gain of RED, GREEN and
BLUE, and also GAIN of WHITE. Press
I H to change the value and switch ON/
OFF the AUTO TEST PATTERN.
Setting range: 0 to +2048
7 COLORS
Adjusting RGB gain of RED, GREEN,
BLUE, CYAN, MAGENTA, YELLOW and
WHITE. Press I H to change the value and
switch ON/OFF the AUTO TEST PATTERN.
Setting range: 0 to +2048
MEASURED
Adjusting 7 colours based on measured
values using colorimeter. Input measured
result in MEASURED DATA, and adjust in
TARGET DATA. Press I H to change the
value and switch ON/OFF the AUTO TEST
PATTERN.
PICTURE MODE in PICTURE menu
need to be set to DYNAMIC for using
colorimeter.
NOTE:
• If the TARGET DATA is outside the colour range of the
projector, the colours will not be projected correctly.
• When each colour option is selected while AUTO TEST
PATTERN is activated, its one colour pattern will be displayed.
• Adjusting red gain of red colour changes its luminance, and
likewise blue gain of blue and green gain of green.
• COLOR MATCHING adjustment should be carried out by a
person who is familiar with the projector or by a service person
because a high level of skill is required to make successful
adjustment.
• Press the DEFAULT button to restore the factory default
settings.
• AI, COLOR CORRECTION and COLOR TEMPERATURE are
not available with COLOR MATCHING.
Remote control
See “Navigating through the menu” on page 15.
See “Main menu and Sub-menu” on page 12.
COLOR CORRECTION
OFF Deactive
USER
Adjust 6 colours, RED, GREEN,
BLUE, CYAN, MAGENTA and
YELLOW.
CONTRAST MODE
NORMAL Maximum brightness
HIGH Maximum contrast
SCREEN SETTING
PT-DZ6710E/PT-DZ6700E
16:10
*1
H 16:9 H 4:3
*1. SCREEN POSITION is not available.
PT-DW6300E
16:10
*1
H 16:9
PT-D6000E
4:3
*1
H 16:9
PT-DZ6710E/PT-DZ6700E
Setting range:
16:10 Not available.
16:9 -60 to +60
4:3 -160 to +160
PT-DW6300E
Setting range:
16:10 Not available.
16:9 -40 to +40
PT-D6000E
Setting range:
4:3 Not available.
16:9 -96 to +96
AUTO SIGNAL
OFF
Only when the AUTO SETUP button is
pressed, the projected image position
will be adjusted.
ON
When the projector detects a
COMPUTER or DVI signal, adjust the
projected image position automatically.