Filter
Top Products
72
- ENGLISH
Settings
Information
Select [Information] from the Main Menu (see
“Navigating through the menu” on page 47),
then select the item from the sub-menu.
Remote Control
Side Control
Input Source Information
Display
The Information Menu is used for checking the status
of the image signal being projected and the operation
of the projector.
You can also press the <INFO.> button on the remote
control to display the Information menu.
Input
J
The selected input source is displayed.
System
J
The selected system is displayed.
H-sync freq.
J
The selected H-sync freq. is displayed.
The horizontal frequency of the input signal is
displayed in KHz, or - - - KHz when no signal.
V-sync freq.
J
The selected V-sync freq. is displayed.
The vertical frequency of the input signal is displayed
in Hz, or - - - Hz when no signal. Numbers of Hz
doubles when during Interlace.
Screen
J
The selected Screen size is displayed.
Language
J
The selected language is displayed.
Lamp power
J
The selected lamp mode is displayed.
Lamp runtime
J
The cumulative lamp operating time is displayed.
Filter counter
J
The lter using time lter is displayed.
Power management
J
[Off] , [Ready] or [Shut down], and [Timer] are
displayed.
Key lock
J
The selected Key lock icon is displayed.
PIN code lock
J
[Off], [On 1] or [On 2] is displayed.
Shutter management
J
*
To display the setting of [Protection] and time.
*
(Only for EZ570 series, EW630 series and EX600
series.)
Simple mode
J
To display the conguration of a simple remote control
mode.
Remote control
J
The selected remote control code is displayed.
Serial number
J
The serial number of the projector is displayed.
The serial number is used to service the projector.