Filter
Top Products
Technical Information
Appendix
ENGLISH -
113
“i” added to the resolution value indicates an interlaced signal.*1 :
Picture quality is indicated by the following symbols.*2 :
AA: Maximum picture quality can be obtained.
A: Signals are converted by the image processing circuit.
B: Some loss of data occurs to make projection easier.
Where marked “○” signals indicates in Plug and Play is compatible with EDID of projector. Unmarked signals *3 :
in Plug and Play may also be compliant if input terminals are written in the format list. Where Plug and Play
is unmarked and nothing is written in the format list, difculties in projecting image may occur even when
computer and projector appear to have same resolution.
Only for EW630 series and EW530 series.*4 :
Only for EZ570 series.*5 :
D-480i and D-576i are only for HDMI input.*6 :
Note
The number of display dots is 1 920 x 1 200 for the
z
EZ570 series ,1 280 x 800 for the EW630 series and
EW530 series, 1 024 x 768 for the EX600 series and EX500 series.
A signal with a different resolution will be projected after converting the resolution to match the projector
display.
When interlaced signals are connected, icker may occur on the projected image.
z