Filter
Top Products
Basic operations by using the remote control
ENGLISH -
43
Basic Operation
Using the P-TIMER button
Press the <P-TIMER> button on the remote control to
operate the Count up/Count down function.
button
Press <P-TIMER> button on the remote
control.
Note
Press the <P-TIMER> button to start the count time.
z
Press the <P-TIMER> button again to stop the count
time. Press the <P-TIMER> button to restart the count.
To cancel the [P-timer] function, press and hold the
<P-TIMER> button. (
Æ
page 67)
Using the ECO button
Press this button to display the Eco management
menu.
button
Press <ECO> button on the remote
control.
Note
For details, see “Eco management” of "Setting".
z
(
Æ
page 66)
Using the SCREEN button
This function allows you to select screen mode or
change the screen size.
button
Press the <SCREEN> button on the
remote control.
Note
For details, see “Screen” of Main menu. (
z
Æ
page 58)
Using the FREEZE function
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
button
Press the <FREEZE> button on the remote control to
freeze the picture on the screen, meanwhile, volume
is muted. To cancel the Freeze function, press the
<FREEZE> button again or press any other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Fig.1
Note
When no signal inputs,
z
mark will appear.
Using the D.ZOOM button
This function allows you to enter to the Digital zoom
+/– mode.
button
Press <D.ZOOM> button on the remote
control.
Note
For details, see "Screen" of Main menu. (
z
Æ
page 59)
Using the LENS SHIFT button
This function allows you to position the screen to the
desired point without having picture distortion.
button
Press <LENS SHIFT> button on the
remote control to display [Lens shift] on
the screen.
Note
For details, please refer to “Adjusting the image”.
z
(
Æ
page 40)
Press and hold the <LENS> button or <LENS SHIFT>
z
button for more than 5 seconds, the lens shift will be
return to the center position.