Filter
Top Products
Replacement
ENGLISH -
95
Maintenance
Pull out the air lter unit. When 4 )
taking out the air lter unit, put
your nger on the air lter unit’s tab
and then pull.
Put the new one back into the position 5 )
and close the lter cover. Make sure
that the air lter unit is properly and
fully inserted.
Connect the AC power cord to the 6 )
projector and turn on the projector.
Resetting the Filter Counter
J
Be sure to reset the Filter counter after replacing the air lter unit. (
Æ
page 71"
Filter counter reset
")
Attention
Turn off the power before you replace the air lter unit.
z
When attaching the air lter unit, make sure that the projector is stable, and work in an environment that is
z
safe, even in the event of the air lter unit dropping.
Do not operate the projector with the air lter unit removed. Dust may accumulate on the optical elements
z
degrading picture quality.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
z
The air lter unit to be replaced should be an unused product.
z
Air filter unit
Tab