Filter
Top Products
Chapter 6 Appendix — Specications
152 - ENGLISH
Operating
environment
Operating
environment
temperature
*1
0 °C (32 °F) - 45 °C (113 °F)
Operating
environment
humidity
10 % - 80 % (No condensation)
Remote
control
Power supply DC 3 V (AAA/R03/LR03 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
102 ] (3.6 ozs.) (including batteries)
Dimensions Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1 When using the projector at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level), the operating environment temperature
should be between 0 °C (32 °F) and 40 °C (104 °F).
If the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [LAMP POWER] is set to [AUTO] or [NORMAL], [LAMP POWER] may be set to
[ECO2] forcibly to protect the projector when the operating environment temperature becomes 40 °C (104 °F) or higher (35 °C (95 °F) or higher
when using the projector at high altitudes).
r Applicable scanning frequency
Refer to “List of compatible signals” (x page 148) for the types of video signals that can be used with the projector.
For video signal Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz
For Y/C signal Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz
For RGB signal
Horizontal: 15 kHz - 100 kHz, Vertical: 24 Hz - 120 Hz
PIAS (Panasonic Intelligent Auto Scanning) system
f Dot clock frequency: 162 MHz or less
For YC
B
C
R
/YP
B
P
R
signal
f 525i (480i)
Horizontal: 15.75 kHz, Vertical: 60 Hz
f 525p (480p)
Horizontal: 31.5 kHz, Vertical: 60 Hz
f 750 (720)/60p
Horizontal: 45 kHz, Vertical: 60 Hz
f 1125 (1035)/60i
Horizontal: 33.75 kHz, Vertical: 60 Hz
f 1125 (1080)/50i
Horizontal: 28.13 kHz, Vertical: 50 Hz
f 1125 (1080)/24sF
Horizontal: 27 kHz, Vertical: 48 Hz
f 1125 (1080)/30p
Horizontal: 33.75 kHz, Vertical: 30 Hz
f 1125 (1080)/50p
Horizontal: 56.25 kHz, Vertical: 50 Hz
f 625i (576i)
Horizontal: 15.63 kHz, Vertical: 50 Hz
f 625p (576p)
Horizontal: 31.25 kHz, Vertical: 50 Hz
f 750 (720)/50p
Horizontal: 37.5 kHz, Vertical: 50 Hz
f 1125 (1080)/60i
Horizontal: 33.75 kHz, Vertical: 60 Hz
f 1125 (1080)/24p
Horizontal: 27 kHz, Vertical: 24 Hz
f 1125 (1080)/25p
Horizontal: 28.13 kHz, Vertical: 25 Hz
f 1125 (1080)/60p
Horizontal: 67.5 kHz, Vertical: 60 Hz
f The SYNC/HD and VD terminals do not support 3 value SYNC.
For DVI-D signal
525i (480i)
*1
, 625i (576i)
*1
, 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
f Displayable resolution: VGA - WUXGA (non-interlaced)
f Dot clock frequency: 25 MHz - 162 MHz
For HDMI signal
525i (480i)
*1
, 625i (576i)
*1
, 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
f Displayable resolution: VGA - WUXGA (non-interlaced)
f Dot clock frequency: 25 MHz - 162 MHz
For DisplayPort signal
525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,
1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
f Displayable resolution: VGA - WUXGA (non-interlaced)
f Dot clock frequency: 25 MHz - 162 MHz
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
Note
f DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.