Filter
Top Products
47
Frequently Asked Questions (cont.)
The connection to the wireless LAN or wired LAN is lost.
• If the live mode is canceled or the connection is lost, start the reconnection procedure from the menu.
If it is still not possible to establish a connection to the LAN, power off the projector, wait for the cooling fan to stop
operating (after the power monitor on the projector changes from orange to red), power the projector back on, and then
start the connection procedure from the menu once again. (See page 11 or page 16.)
The connection cannot be established with IEEE802.11 g.
• In environments with wireless LAN adapters that support both IEEE802.11b and 802.11g, the connection may be
established via 802.11b.
• In some operating environments, the connection may be established via 802.11b, depending on the location, radio signal
conditions, distance, or other factors.
• Some wireless LAN adapters only support ad hoc connections via IEEE802.11b.
The transfer rate is slow.
• The transfer rate may be slower in some operating environments (depending on such factors as the location, radio signal
conditions or distance).
• Avoid placing metal objects or other conductors near the wireless LAN antenna of a computer, otherwise the transfer rate
may be slower.
• When WEP is set the image data is converted, so transfer takes time.
Image display is slow or animation is not displayed smoothly.
• Is the computer CPU speed slow? (See page 9)
Live mode depends largely upon the computer CPU performance.
• Adverse effects may be exerted if there is any wireless communication in the vicinity.
• When [Resolution] is set to [High Definition] in the <Option> window (See page 24), it may take longer time to display
images.
• The speed may be slower when any other applications are running concurrently.