Basic Operation
Remote control operation
ENGLISH - 28
You can project the image and another
source of image at the same time in double
window style. Press any button of RETURN,
MENU, SIDE BY SIDE or INPUT SELECT
buttons to return to the normal projection
style.
Q Unavailable combinations
The following combinations are not available.
COMPUTER1 - COMPONENT
COMPUTER2 - NETWORK
S-VIDEO - VIDEO
S-VIDEO - COMPONENT
VIDEO - COMPONENT
Q Switching the signal
In default, the first image is displayed on the left
and the second image is displayed on the right.
You can switch and cycle through the signals of the
second image by pressing F G
You can enlarge the projected image down
to a centred area for emphasizing within the
range of 1x to 2x.
Q Enlarging the image
1. Press DIGITAL ZOOM +/- once.
The centred area of the image will then be enlarged
to 1.5x.
2. Adjust the image size by pressing DIGITAL ZOOM
+/-.
The image size will be changed in steps of 0.1.
Q Shifting the centre point
Press F G I H to shift the centre point.
You can control the volume of the built-in
speakers and output sound. Press +/- to
control the volume.
Projecting 2 images at a time
NOTE:
• FREEZE and VOLUME controls are available with the
first image only.
• While SIDE BY SIDE is activated, DIGITAL ZOOM,
INDEX-WINDOW and AUTO SETUP are not available.
• While SIDE BY SIDE is activated, the main menu will
not be displayed.
• The second image will apply to the value of the
PICTURE settings of the first image except
CONTRAST and BRIGHTNESS.
• COMPUTER and NETWORK signals will not keep the
adjusted aspect ratio.
Image 1
Image 1
Image 2
NETWORK
COMPUTER2COMPUTER1 S-VIDEO
COMPONENT VIDEO
Enlarging the centred area
NOTE:
• When the COMPUTER signal is projected, the
enlargement range will be changed to 1x to 3x. When
the FRAME LOCK in POSITION menu is set to ON, the
enlargement range is 1x to 2x. See “FRAME LOCK” on
page 35.
• When the input signal is changed while the DIGITAL
ZOOM is activated, the DIGITAL ZOOM will be
cancelled.
• While DIGITAL ZOOM is activated, FREEZE is not
available.
Controlling the volume of the speaker
NOTE:
• Power consumption can be reduced if the volume level
is lowered.