Panasonic PT-LB30NTE Projector User Manual


 
60-ENGLISH
Specifications
Power supply: 100 V - 240 V ~, 50 Hz/60 Hz
Power consumption: 300 W [During standby (when fan is
stopped): Approx. 3 W]
Amps: 3.5 A - 1.8 A
LCD panel:
Panel size (diagonal): 0.8 type (20.32mm)
Aspect ratio: 4:3
Micro lens array: Available
Display method: 3 transparent LCD panels (RGB)
Drive method: Active matrix method
Pixels: 786 432 (1 024 x 768) x 3 panels
Lens: Manual zoom (1 - 1.2) / Manual focus
F 1.7 - 1.8 f 24.0 mm - 28.8 mm
Lamp: UHM lamp (220 W)
Luminosity: 3 000 lm
Scanning frequency (for RGB signals):
Horizontal scanning frequency: 15 kHz - 91 kHz
Vertical scanning frequency: 50 Hz - 85 Hz
Dot clock frequency: Less than 100 MHz
YPBP
R signals: 480i, 576i, 480p, 576p, 1 080/60i,
1 080/50i, 720/60p
Colour system: 7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/
PAL60/SECAM)
Projection size: 838.2 mm - 7 620 mm (33˝ - 300˝)
Throw distance: 1.1 m - 10.8 m (3´7˝ - 35´5˝)
Optical axis shift: 6:1 (fixed)
Screen aspect ratio: 4:3
Installation: Front/Rear/Ceiling/Desk (menu selection)
Speaker: 4 cm x 3 cm oval x 1
Max. usable volume output: 1 W (mono)
Wireless LAN (PT-LB30NTE only):
IEEE802.11 b/g
Connectors
RGB IN/OUT: Dual line, D-sub HD 15-pin (female)
(One line is available for input and output,
selectable using an on-screen menu)
During YPBPR input/output:
Y: 1.0 V [p-p] (Including sync), 75
PB, PR : 0.7 V [p-p], 75
During RGB input/output:
R.G.B.: 0.7 V [p-p], 75
G.SYNC: 1.0 V [p-p], 75
HD, VD: TTL, automatic positive/negative polarity
compatible