Panasonic PT-LB60NTE Projector User Manual


 
E
NGLISH-21
Getting started
Connections
Notes on connections
BRead the instruction manual for each peripheral device carefully before
connecting it.
BTurn off the power supply for all peripheral devices before making any
connections.
BIf the cables necessary for connection are not included with the peripheral
device or available as an option, you may need to prepare a proper cable
for the device concerned.
BIf there is a lot of jitter in the video signal, the projected image may flicker.
In such cases, it will be necessary to connect a TBC (time base corrector).
BRefer to the list on page 68 for details on compatible signals which can be
input to the projector.
BOnly one audio system circuit is available for the AUDIO IN L-R
connectors, so if you change the audio input source, you will need to
remove and insert the appropriate plugs.
Connecting to computer
RGB signal cable
(accessory)
RGB signal cable
(accessory)
Audio system
Computer
Computer
DIN 8-pin
(male)
Computer for
control use
Monitor
Refer to the accessory CD-ROM for details on the wireless network
that can be used for controlling the projector with a personal
computer.
Serial adapter
(ET-ADSER : sold
separately)