Filter
Top Products
E
NGLISH-41
Adjustments and settings
The mode best used in dark rooms
is “NATURAL”. For rooms having
regular lighting conditions in use,
select “STANDARD”. For
exceptionally bright rooms, use
“DYNAMIC”.
“BLACKBOARD” is available only
when “BLACKBOARD” in the
“OPTION” menu is set to “ON”.
Select “BLACKBOARD” when
projecting onto blackboards.
CONTRAST
This adjusts the contrast of the
picture. (Adjust the “BRIGHTNESS”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright: I button
The picture is dark: H button
BRIGHTNESS
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
COLOR
(S-VIDEO/VIDEO/YPBPR only)
The color is too deep: I button
The color is too pale: H button
TINT
(NTSC/NTSC 4.43/YPBPR only)
This adjusts the flesh tones in the
picture.
The flesh tones are greenish:
I button
The flesh tones are reddish:
H button
SHARPNESS
To soften the picture details:
I button
To sharpen the picture details:
H button
COLOR TEMPERATURE
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
Normally “STANDARD” should be
selected. If the white areas of the
pictures appear reddish, set to
“HIGH”. If the white areas of the
pictures appear bluish, set to
“LOW”.
sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictures to be
reproduced more faithfully, make
the following settings.
##
Press the
FF
or
GG
button to
select “PICTURE MODE”, and
then press the
II
or
HH
button
to select “NATURAL”.
$$
Press the DEFAULT button on
the remote control unit.
%%
Press the
FF
or
GG
button to
select “COLOR
TEMPERATURE”, and then
press the
II
or
HH
button to
select “STANDARD”.
Projecting sRGB-
compatible pictures