Filter
Top Products
Basic Operation
Remote control operation
ENGLISH - 28
You can enlarge the projected image down
to a centred area for emphasizing within the
range of 1x to 2x.
Q Enlarging the image
1. Press any side of the DIGITAL ZOOM +/- button
once.
The centred area of the image will then be enlarged
2. Adjust the image size by pressing the
DIGITAL ZOOM +/- button.
Changes the size of the image in steps of 0.1.
Q Shifting the centre point
Press F G I H to shift the centre point.
Enlarging the centred area
Press “-”
Press “+”
NOTE:
• When the COMPUTER signal is projected, the enlargement range will be changed to 1x to 3x. When the FRAME LOCK
in POSITION menu is set to ON, the enlargement range is 1x to 2x. See “FRAME LOCK” on page 35.
• When the input signal is changed while the DIGITAL ZOOM is activated, the DIGITAL ZOOM will be cancelled.
• While the DIGITAL ZOOM is activated, the AUTO SETUP, FREEZE, DEFAULT, INDEX-WINDOW and FUNCTION
(except when AV MUTE is assigned) buttons are not available.