Filter
Top Products
Preparation
About Your Projector
ENGLISH - 16
Battery compartment
1. Press the tab and lift up the cover.
2. Insert the batteries according to the polarity diagram
indicated inside.
Top view
(page 25)
Attaching a hand
strap
You can attach a favourite strap
on to the remote control.
Remote control
POWER button
Switch between stand-by
mode and projection mode.
(page 21/page 22)
INPUT SELECT buttons
Switch the required input
signal button to select.
The WIRELESS button is
only for PT-LB80NTE/
PT-LB75NTE.
See CD-ROM contents.
The PAGE buttons are only
for PT-LB80NTE/
PT-LB75NTE.
See CD-ROM contents.
Display the main menu.
(page 29)
Navigate through the
menus with FGIH, and
activate the menu item with
ENTER button. (page 29)
Reset some of the settings to
the factory default settings.
(page 26)
Turn off the projection
temporarily. (page 26)
The MULTI-LIVE button
is only for PT-LB80NTE/
PT-LB75NTE.
See CD-ROM contents.
Control to adjust the
volume of the speaker.
(page 27)
Return to the previous menu.
(page 29)
Capture the projected image
as a frozen picture. (page 26)
Detect the input signal and the
setting of POSITION, DOT
CLOCK and CLOCK PHASE
in POSITION menu will be
adjusted automatically for
COMPUTER signals. (page 25)
The COMPUTER SEARCH
button is only for
PT-LB80NTE/
PT-LB75NTE.
See CD-ROM contents.
Control to change the
scale by means of digital
zoom. (page 28)
Assign a useful function for
shortcut. (page 27)
Display the frozen image
while the display of
subsequent images
continues. (page 27)
Remote control signal
emitters
NOTE:
• Do not drop the remote control.
• Avoid contact with liquids or moisture.
• Use manganese batteries or alkaline batteries with the remote control.
• Do not attempt to modify or disassemble the remote control. Contact an Authorised Service Centre for repairs.
• Do not keep pressing the remote control buttons as this may shorten battery life.
• See “Remote control operation” on page 25.