Panasonic PT-LB80E Projector User Manual


 
Getting Started
Setting up
ENGLISH - 18
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector,
See “INSTALLATION” on page 37.
You can adjust the projection angle in the vertical direction by pressing the leg adjuster buttons.
See “Positioning the image” on page 24.
Projection method
J Setting on a desk/floor and
projecting from front
J Setting on a desk/floor and
projecting from rear
INSTALLATION: FRONT/DESK INSTALLATION: REAR/DESK
J Mounting in the ceiling and
projecting from front
J Mounting in the ceiling and
projecting from rear
INSTALLATION: FRONT/CEILING INSTALLATION: REAR/CEILING
NOTE:
A translucent screen is required for rear projection.
When mounting the projector in the ceiling, the optional ceiling mount bracket (ET-PKB80) is required.
Front leg adjusters and throwing angle
NOTE:
Heated air comes out of the air exhaust port. Do not touch the air exhaust port directly.
If keystone distortion occurs, see “KEYSTONE” on page 34.