Filter
Top Products
ENGLISH - 20
Basic Operation
Switching the projector on/off
J Connecting
1. Make sure the shape of the mains plug and the
AC IN terminal on the back of the projector match,
then push the plug all the way in.
2. Align the side of the power cord secure lock with
the side guide rail of the AC IN terminal of the
projector and slide it in.
3. Place the latch to the latch catcher and press until
it clicks.
4. Connect the mains lead to a mains socket.
5. The POWER and POWER LOCK indicators light
in red and the projector stays in standby mode.
J Direct power on function
If the DIRECT POWER ON in OPTION menu is set
to ON, connect the mains lead to a mains socket
and the projection will start even when the control
panel is disabled or the POWER button is locked.
See “DIRECT POWER ON” on page 37.
If the DIRECT POWER ON is set to OFF, the
projector will be at the same mode as last
unplugged, standby mode or projection mode.
J Disconnecting
1. Unplug the mains lead from the mains socket.
2. Depress the latch and slide the cover off.
3. Slide the power cord secure lock up along the side
guide rail and remove.
4. Hold the plug and unplug the mains lead from the
AC IN terminal on the back of the projector.
POWER indicator lights in orange if the internal
cooling fan is still operating by internal power supply.
J Direct power off function
You can switch off the electric power supply any
time by unplugging the mains plug from the mains
socket or by switching off the main power. The
internal lamp cooling fan keeps operating by the
internal power supply, and stops automatically
when cooled enough.
Mains lead
Rail guide
Latch
Latch
Rail guide
NOTE:
• Do not use other than a provided mains lead.
• Ensure all the input devices are connected and turned off before connecting the mains lead.
• Do not force the connector as this may damage the projector and/or the mains lead.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.
• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take
a while to start the projection.
• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take
a while to start the projection.
• Do not put the projector into the carrying bag with the POWER indicator lit.