Filter
Top Products
SERIALPC IN
AUDIO
SLOT1 SLOT2 SLOT3
9
From SERIAL
Terminal on Computer
(see page 11)
From EXTERNAL
monitor terminal on
Computer (see page 10)
Optional Terminal
Board Insert Slot
(covered)
Connections
Preparation for Wall-hanging
Accessories
Before mounting the display on the wall, you must remove the pedestal from the display.
Follow the steps below:
1
Disconnect all the cables from the display.
2
Remove the pedestal.
A
Remove four screws
B
Pull out the pedestal
B
A
A
Foam mat or thick
soft cloth
WARNING
•
Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount will void your unit’s warranty.
•
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
•
Do not mount this LCD display directly below ceiling lights (such as spotlights, floodlights, or halogen lights) which
typically give off high heat. Doing so may warp or damage plastic cabinet parts.