Filter
Top Products
87
Item Parameter name Parameter value Description
Iris control IRIS –10 - –1 CLOSE
0 RESET
1 - 10 OPEN
It will take around 60 ms for one step
increment or decrement of the IRIS param-
eter to adjust the iris.
Defroster control DEF on, off
Wiper control WIPER on, off
AUX1 output control AUX1 on, off
AUX2 output control AUX2 on, off
■ Important Notices
• It is necessary to enter the parameter value for the "CHSEL" parameter.
•When controlling the pan-tilt head, it is necessary to enter the parameter value for both the vertical control (TILT)
and the horizontal control (PAN).
For example, to move the camera connected to the VIDEO IN 1 connector to the left, enter:
http://(IP address of the encoder)/cgi-bin/camctrl.cgi?CHSEL=1&PAN=-4&TILT=0
■ Examples
1. To move the pan-tilt head connected to the VIDEO IN 1 connector upward
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=1&PAN=0&TILT=4
2. To zoom out (WIDE) the camera connected to the VIDEO IN 2 connector
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=2&ZOOM=-2
3. To start auto pan of the pan-tilt head connected to the VIDEO IN 3 connector
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=3&ATPAN=on
4. To set the focus of the camera connected to the VIDEO IN 4 connector to NEAR
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=4&FOCUS=-2
5. To close the iris of the camera connected to the VIDEO IN 1 connector
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=1&IRIS=-1
6. To set the wiper of the camera connected to the VIDEO IN 2 connector to ON
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=2&WIPER=on
7. To set the AUX 1 of the camera connected to the VIDEO IN 3 connector to OFF
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=3&AUX1=off