Panduit LS3E Printer User Manual


 
CONNECTING THE BATTERY CHARGER
A battery charger has been included with your LS3E
Printer. There is an input connector on the right hand side
of the battery pack. Insert the charger plug into the
connector and plug the battery charger into an outlet. The
printer will not operate with the battery charger plugged in.
WARNING:
This battery pack contains a toxic substance (cadmium)
and must be disposed of properly. Do not disassemble,
short, or dispose of this battery in a fire which might
cause it to release toxic substances or explode. Contact
your local authorities for appropriate disposal and for
additional information.
PULL
FIGURE 1
SQUEEZE
PULL
BATTERY POWER
It is recommended the user charge the battery for a
minimum of 15 hours before operating the printer. When
the battery pack power is low, the printer will display
“WARNING: LOW BATTERY” until the user presses any
key to acknowledge the message. To obtain maximum
battery life the battery should continue to be used until the
5
26
WARNING:
Use of chargers other than those supplied by Panduit may
damage or shorten the life of the printer or battery pack!
LHSW-1/LHSY-1•
LHSW-2/LHSY-2
LHSW-3/LHSY-3•
LHSW-4/LHSY-4
LHSW-5/LHSY-5
LHSW-6/LHSY-6•
LHSW-7/LHSY-7
LW-1
LW-2
LW-3
LW-4
LW-5•
LW-6•
LWS-1
LWS-2
LWS-3
LWS-4
LWS-5
LWS-6
LWS-7
LWS-8•
LWS-9•
LWS-10
LWS-11
LWS-12
LWS-13
LWS-14
LWS-54
1
1
3
3
8
2
2
13
13
10
7
13
7
4
4
4
3
3
3
3
3
4
7
7
10
10
16
4
8
18
8
18
18
8
18
8
17
8
8
7
7
8
17
28
8
17
8
17
7
7
17
28
17
28
17
17
1
1
3
3
8
2
2
13
13
10
7
13
7
4
4
4
3
3
3
3
3
4
7
7
10
10
16
4
6
14
6
14
14
6
14
6
14
6
6
6
6
6
14
22
6
14
6
14
6
6
14
22
14
22
14
14
1
1
2
2
5
1
1
9
9
7
5
9
5
3
3
3
2
2
2
2
2
3
5
5
7
7
11
3
4
10
4
10
10
4
10
4
10
4
4
4
4
4
10
16
4
10
4
10
4
4
10
16
10
16
10
10
0
0
1
1
4
1
1
6
6
5
3
6
3
2
2
2
1
1
1
1
1
2
3
3
5
5
8
2
0
0
3
7
7
3
7
3
7
3
3
3
3
3
7
11
3
7
3
7
3
3
7
11
7
11
7
7
T206
T106
T211
T111
T121
T208
T108
1332
2532
1325
1319
2532
2519
1313
2513
3813
1310
2510
1310
2510
2510
2513
2519
3819
2525
3825
2538
2513
0.50 (12.7)
1.00 (25.4)
0.50 (12.7)
1.00 (25.4)
1.00 (25.4)
0.50 (12.7)
1.00 (25.4)
1.00 (25.4)
1.00 (25.4)
0.50 (12.7)
0.50 (12.7)
0.50 (12.7)
0.50 (12.7)
0.50 (12.7)
1.00 (25.4)
1.50 (38.1)
0.50 (12.7)
1.00 (25.4)
0.50 (12.7)
1.00 (25.4)
0.50 (12.7)
0.50 (12.7)
1.00 (25.4)
1.50 (38.1)
1.00 (25.4)
1.50 (38.1)
1.00 (25.4)
1.00 (25.4)
0.25 (6.4)
0.25 (6.4)
0.44 (11.2)
0.44 (11.2)
0.84 (21.3)
0.34 (8.5)
0.34 (8.5)
1.25 (31.8)
1.25 (31.8)
1.00 (25.4)
0.75 (19.1)
1.25 (31.8)
0.75 (19.1)
0.50 (12.7)
0.50 (12.7)
0.50 (12.7)
0.38 (9.5)
0.38 (9.5)
0.38 (9.5)
0.38 (9.5)
0.38 (9.5)
0.50 (12.7)
0.75 (19.1)
0.75 (19.1)
1.00 (25.4)
1.00 (25.4)
1.50 (38.1)
0.50 (12.7)
Panduit
Label
P/N
Label
Code*
Print
Width
In. (mm)
Print
Length
In. (mm)
Compressed Text
Lines per
label
Characters
per line
Lines per
label
Characters
per line
Lines per
label
Characters
per line
Lines per
label
Characters
per line
Small Text
Normal Text
Large Text
• Butt-cut double wide
To order with colored print-on area, add YL for Yellow, RD for Red, BU for Blue, GR for Green, IG for Gray, OR for Orange,
PR for Purple, BR for Brown
*Label codes are distinct codes used to tell the printer the size of the label.