Filter
Top Products
4. Quick Setup
6218-A2-GB23-00 September 2005
4-3
Quick Setup with Auto-Connect Disabled
Procedure
1. Select Quick Setup. The Quick Setup initial screen appears.
2. Verify that DSL Auto-Connect is not selected. Entry boxes for VPI and VCI
appear when DSL Auto-Connect is not selected.
3. Specify VPI and VCI as directed by your ISP.
Figure 4-4. Specifying VPI and VCI
4. Click on Next. The Connection Type screen appears.
Figure 4-5. Connection Type
5. Select the protocol and encapsulation type required by your ISP.