Filter
Top Products
BSX8-A2-GZ40-10 March 2005 9
NMS Management Configuration
Use the Management Configuration screen to set the unit’s IP address and other
management parameters.
Procedure
To configure management parameters:
1. From the home screen, click on the Management Config button. The
Management Configuration screen appears.
2. Select or enter the following parameters:
Parameter Description
IP Address Specify the management IP address for the DSLAM.
Subnet Mask Specify the subnet mask for the IP address.
Gateway Specify the first-hop gateway address.
EtherType Select the type of packets supported by your router.
This is used only for backbone VLAN (Q in Q) traffic.
Inband MGMT Check this box if you will use inband management
(that is, you will allow the device to be contacted by
ports other than the MGMT port)..
VLAN Id Specify a VLAN identifier for inband management.
Priority Specify a priority (0–7) for inband management traffic.