Filter
Top Products
1212
USB1500 Wireless PC LAN Adapter
®
STEP 3 CONTINUED: Select FINISH at the following screen. This will complete
the installation of the ParkerVision software.
If the screen above does not appear, RESTART your computer by clicking START,
then SHUT DOWN, then RESTART. Once your computer has restarted, continue the
installation by following the
steps below:
Please connect the USB1500 Wireless
LAN Cable into your computer’s USB port.
Double click the ParkerVision USB1500
icon on your desktop.
The ParkerVision Utility is now running in the background and has
placed an icon in the lower right System Tray.
Double-click on this icon in the System Tray as shown to the right.
NOTE: Windows 2000 Users can now go to CHAPTER 3 of this Manual
to complete the hardware installation and confi guration process.
For Windows XP Users:
Double clicking the ParkerVision USB1500 icon may cause the following message to appear:
“Windows Zero Confi guration was detected.
Please disable Windows Wireless Network Control.”
If you see this message, for best performance, you will now want to TURN OFF or Disable
Windows’ control of wireless networking. Proceed to the next page and follow the steps
shown to complete this process.
Double Click this icon
in the System Tray