Partner Tech EM200WIN7 Tablet User Manual


  Open as PDF
of 40
 
23
CHAPTER 3
UPGRADING COMPONENTS
This chapter describes how to upgrade components for the EM-200. The following topics are described.
• Safety and precautions on page 23
• Before you begin on page 24
• Upgrading the hard drive on page 25
• Upgrading the memory module on page 27
• Upgrading the Mini-PCIE card on page 28
Safety and precautions
Computer components and electronic circuit boards can be damaged by discharges of static electricity.
Working on computers that are still connected to a power supply can be extremely dangerous. Follow these
guidelines to avoid damage to the computer or injury to yourself.
• Always disconnect the unit from the power outlet.
• Leave all components inside the static-proof packaging that they ship with until they are ready for instal-
lation.
• After replacing optional devices, make sure all screws, springs, or other small parts are in place and are
notleftlooseinsidethecase.Metallicpartsormetalakescancauseelectricalshorts.
If the LCD breaks and uid gets onto your hands or into your eyes,
immediately wash with water and seek medical attention.
WARNING
CAUTION
Only qualied personnel should perform repairs on the machine.
Damage due to unauthorized servicing is not covered by the warranty.
If you are not condent of installing a hard drive, memory card or LAN
card, we recommend that you refer the job to qualied personnel.
The inverter card has high voltage. Do not touch the inverter card while
power is connected to the machine. Unplug the power cord before
attempting to replace any part.
WARNING
CAUTION
To prevent static damage to components, wear a grounded wrist strap.
Alternatively, discharge any static electricity by touching the bare metal
chassis of the unit case, or the bare metal body of any other grounded
appliance.
CAUTION
Hold electronic circuit boards by the edges only. Do not touch the
components on the board unless it is necessary to do so. Do not ex or
stress the circuit board. Do not hold components such as a processor
by its pins; hold it by the edges.
 previous next