Filter
Top Products
Connecting Power 19
CopperLink 1211E/1212E User Manual 2 • Installation
Connecting Power
CAUTION
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temper
ature, flammability, and
mechanical serviceability.
The CL1212E does not have a power switch, so it powers up as soon as it is plugged in.
An external AC or DC power supply is available separatel
y. This connection is made via the barrel jack on the
rear panel of the CL1212E. No configuration is necessary for the power supply.
DC power (supplied via the power supply jack to the CL1212) must meet the following requirements; DC
po
wer supplied must be regulated 5 VDC ±5%, 1.0A minimum. Center pin is +5 V. The barrel type plug has
2.5/5.5/10mm I.D./O.D./Shaft Length dimensions.