Filter
Top Products
Configuring the RAS with a Web browser 42
Model 2960/2996 RAS User Manual 3 • Configuring the RAS for operation
Figure 32. MFR Version 2 Modify window
5. Click on the
Country
pop-up menu. If your country is not available, select ituStandard(1).
6. Click on
Submit
.
7. Scroll down to the
Interregister signaling
section.
8. Type the Called Number Total Digits in the box provided. This setting tells the RAS how many digits to
expect from the phone company. The called Number is the number a user dials to call into the RAS.
9. Set the First/Middle and Last Response Codes. These are the codes the switch expects after each digit sent
by the switch.
10. Click on
Submit
.
11. Type the Calling Number Total Digits in the box provided. This setting tells the RAS how many digits to
expect from the phone company. This number is the calling party’s phone number or Caller-ID informa
-
tion.
12. Set the First/Middle and Last Response Codes. These are the codes the switch expects after each digit sent
by the switch.
13. Click on
Submit
.
signaling is now configured for MFC-R2.