Filter
Top Products
2
TABLE OF CONTENTS
SECTION PAGE
1.0Warranty Information.............................................................2
1.1Radio and TV Interference
1.2CE Notice
1.3 Service Information
2.0General Information...............................................................4
2.1Features
2.2Description
3.0 Operation................................................................................5
4.0Installation.............................................................................6
Appendix A - Specifications..........................................................7
Appendix B - V.35 Connector and Pin Assignments.....................8
Appendix C - RS-530 Connector and Pin Assignments...............9
Appendix D - RS-449 Interface Pin Assignments.......................10
1.0 WARRANTY INFORMATION
Patton Electronics
warrants all Model 3004 MTE components to be
free from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment. This
warranty is limited to defects in workmanship or materials, and does not
cover customer damage, abuse or unauthorized modification. If this
product fails or does not perform as warranted, your sole recourse shall
be repair or replacement as described above. Under no condition shall
Patton Electronicsbe liable for any damages incurred by the use of
this product. These damages include, but are not limited to, the
following: lost profits, lost savings and incidental or consequential
damages arising from the use of or inability to use this product. Patton
Electronicsspecifically disclaims all other warranties, expressed or
implied, and the installation or use of this product shall be deemed an
acceptance of these terms by the user.
1.1 RADIO AND TV INTERFERENCE
The Model 3004-MTE generates and uses radio frequency energy,
and if not installed and used properly—that is, in strict accordance with
the manufacturer's instructions—may cause interference to radio and
television reception. The Model 3004-MTE has been tested and found
to comply with the limits for a Class A computing device in accordance
with the specifications in Subpart J of Part 15 of FCC rules, which are
designed to provide reasonable protection from such interference in a
commercial installation. However, there is no guarantee that
interference will not occur in a particular installation. If the Model 3004-
MTE does cause interference to radio or television reception, which
can be determined by disconnecting the unit, the user is encouraged to
try to correct the interference by one or more of the following measures:
moving the computing equipment away from the receiver, re-orienting
the receiving antenna and/or plugging the receiving equipment into a
different AC outlet (such that the computing equipment and receiver are
on different branches).
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive of the Union European (EU). A Certificate of Compliance is
available by contacting Technical Support.
1