Filter
Top Products
1.3 SERVICE
All warranty and nonwarranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Services at:
telephone: (301) 975-1007
email: support@patton.com
web address: http://www.patton.com
NOTE:Packages received without an RMA number will not be
accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Patton Model 3004-MTE . Technical Service hours: 8AM to 5PM EST,
Monday through Friday.
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for One
Year parts and labor. If any questions or problems arise during installation
or use of this product, please do not hesitate to contact Patton Electronics
Technical Services at (301) 975-1007.
2.1 FEATURES
· DCE to DCE connection
· Interface powered - No external power supply required
· Single 64-bit, auto-centering buffer
· Data rates up to 2.304 Mbps
· Available with male or female connectors and integral 6 foot cables
· Compact
· Easy to install
· Three models available:
3004-MTE/V.35- V.35 compatible. Male or female 34-pin V.35
connectors on 6 foot cables
3004-MTE/530- RS-422/V.11 compatible. Male or female
25-pin D-sub connectors on 6 foot cables
3004-MTE/V.36-RS-422/V.11 compatible. Male or female
37-pin D-sub connectors on 6 foot cables
2.2 DESCRIPTION
The Model 3004-MTE series are self-powered tail circuit buffers, which
enable the connection of two DCEs in a "tail circuit" configuration. A tail
circuit adapter is required to couple two DCE devices whose clocks are of
the same frequency but are not in phase. The Model 3004-MTE utilizes a
single auto-centering buffer to prevent data errors caused by clock jitter and
clock phase differences. All models perform the necessary "cross over"
wiring connections between the two DCEs. Installation is easy and
straightforward.
3 4