Filter
Top Products
2
1.0 WARRANTY INFORMATION
Patton Electronics warrants all Model 2124/2130 components to be free
from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials, and does
not cover customer damage, abuse or unauthorized modification. If this
product fails or does not perform as warranted, your sole recourse shall
be repair or replacement as described above. Under no condition shall
Patton Electronics be liable for any damages incurred by the use of this
product. These damages include, but are not limited to, the following:
lost profits, lost savings and incidental or consequential damages arising
from the use of or inability to use this product. Patton Electronics specif-
ically disclaims all other warranties, expressed or implied, and the instal-
lation or use of this product shall be deemed an acceptance of these
terms by the user.
1.1 RADIO AND TV INTERFERENCE
The Model 2124/2130 generates and uses radio frequency energy, and if
not installed and used properly—that is, in strict accordance with the
manufacturer’s instructions—may cause interference to radio and televi-
sion reception. The Model 2124/2130 has been tested and complies
with the limits for a Class A computing device in accordance with the
specification in Subpart J of Part 15 of FCC rules, that are designed to
provide reasonable protection from such interference in a commercial
installation. However, this is no guarantee that interference will not occur
in a particular installation. If the Model 2124/2130 does cause interfer-
ence to radio or television reception, which can be determined by discon-
necting the unit, the user is encouraged to try to correct the interference
by one or more of the following measures: moving the computing equip-
ment away from the receiver, re-orienting the receiving antenna and/or
plugging the receiving equipment into a different AC outlet (such that the
computing equipment and receiver are on different branches). In the
event the user detects intermittent or continuous product malfunction due
to nearby high power transmitting radio frequency equipment, the user is
strongly advised to use only a shielded twisted pair data cable that is
bonded to metalized external outer shield plugs at both ends. The use of
a shielded cable satisfies compliance with the Electromagnetic Compati-
bility (EMC) directive.