Filter
Top Products
4
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
One Year parts and labor. If any questions or problems arise during
installation or use of this product, please do not hesitate to contact Pat-
ton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
• Integral V.24 Male to 10BaseT Ethernet (Model 2124)
• Integral EIA-530 Male to 10BaseT Ethernet (Model 2130)
• Industry standard, shielded RJ-45 10BaseT connection
• 802.3 Ethernet supported by Transparent LAN bridging
• PPP Bridging Control Protocol (RFC 1638) with auto detection for
compatibility with existing Patton Bridge Modules
• 4096 MAC address table
• 1 MB RAM; 128KB FLASH
• Throughput latency of 1 frame
• Automatic LAN MAC address aging
• Nine LEDs monitor power, LAN, and DTE Interface signals
2.2 DESCRIPTION
The Patton Model 2124/2130 MicroBridge is an Ethernet Bridge that pro-
vides LAN extension when used in conjunction with a V.24 or EIA-530
DCE device, such as a DSU/CSU, NTU, or router. The Model 2124/2130
performs transparent Ethernet bridging and functions at the MAC level,
thus is transparent to higher level protocols such as TCP/IP, DECnet,
NETBIOS, and IPX network protocols. Only broadcast, multicast, or
frames set up for peered LAN are forwarded. The Model 2124/2130 is
802.3 Ethernet compliant and supports PPP Bridging Control Protocol
(RFC 1638) on the DTE side.