Filter
Top Products
6
IPLink 2603 & 2620 Quick Start Guide
Connecting to the RJ-48C WAN port
1.
Obtain a twisted-pair cable with an RJ-48C plug connector at each end.
2.
Plug one end of the cable into the RJ-48C socket (labeled
WAN
)
on the IPLink Router.
3.
Plug the other end of the cable into the T1/E1 device.
4.
Repeat steps 1 through 3 to install the remaining WAN cables on a Model 2620
Connecting to the unbalanced 75-ohm TX and RX WAN ports (Model 2603/K
and 2620/KK only)
1.
Obtain a coaxial cable with a BNC connector at each end.
2.
Plug one end of the cable into the transmit socket (labeled
TX
)
on the IPLink Router. Plug the other end
of the cable into the receive port of the E1 device.
3.
Plug one end of the cable into the receive socket (labeled
RX
)
on the IPLink Router. Plug the other end of
the cable into the transmit port of the E1 device.
6.0 Complete the installation
To finish configuring your IPLink, and for detailed information about installing, configuring, operating, and trou-
bleshooting, refer to the
Models 2603, 2621, and 2635 IPLink Series High Speed Routers User Guide
and appli-
cation notes, available on the enclosed Patton CD-ROM or at
www.patton.com.
A.0 Customer and Technical Support
Toll-Free VoIP support: call
sip:support@patton.com
with a VoIP SIP phone
Online support: www
.patton.com
E-mail support:
support@patton.com
—answered within 1 business day
Telephone support:
•
Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to
2200 UTC/GMT)
•
Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800
UTC/GMT)
Fax:
+1 (253) 663-5693
(USA)
or +41 (0)31 985 25 26 (
Switzerland)