Filter
Top Products
8
Entering Data
Entering data using the keypad is similar to entering data on a cell phone.
There are three data entry modes:
♦ Normal (Numeric) mode – Default. Press the key to display what appears
on the face of the key (numbers).
♦ Lower-Case Alphabetic mode – Press Alpha once to display lower-case
letters. Press the key several times until you see the letter you need. For
example, to select lower-case c, press Alpha once and 2 three times.
♦ Upper-Case Alphabetic mode – Press Alpha twice to display upper-letters.
Press the key several times until you see the letter you need. For example,
to select upper-case C, press Alpha twice and 2 three times.
Entering Special Characters/Symbols
The table shows how to enter special characters and symbols when in Lower-
case and Upper-case Alpha Mode.
Press
Key
Lower-case Alpha Mode
Press Alpha Once
Upper-case Alpha Mode
Press Alpha Twice
1 <space> : < ( ‘ <space> ; > ) “
0 . - + / * . = @ % $
Cleaning the Printer
Do not use sharp objects to clean the printer. Do not use household cleaners
to clean the printer. Use isopropyl alcohol on the interior areas only (except
where specified), never on the exterior.
Cleaning the Printhead
1. Turn off the printer.
2. Open the supply cover and remove the supplies.
3. Check the supply holder for adhesive buildup and clean
it if necessary.
4. Ground yourself by touching a metal object other than
the printer. Grounding prevents electrostatic
discharge, which may damage the printer.
5. Clean the printhead area of all adhesive and label
particles using a Monarch Cleaning Pen (#114226) or a soft cloth moistened
with isopropyl alcohol. Allow the printer to dry before reloading supplies.