Filter
Top Products
Enabling the Scanner
If you do not have an ADK script running, terminal mode provides
support for the scanner; however, the scanner must be enabled
through the Keyboard’s Main Menu.
This section is not necessary if using Version 2.3 or greater of the
Keyboard’s software, because the COM2 Port is always enabled.
1.
Press X on the keyboard within the first two seconds when
the printer/keyboard are turned on to see the Keyboard’s
Main Menu.
2.
Press
L
or
R
until you see
MAIN MENU
l
Setup
r
3.
Press
N
.
SETUP
COM1
r
4.
Press
L
or
R
until you see
SETUP
l
COM2 (Scanner)
r
5.
Press
N
.
COM2 (Scanner)
Enable Scanner
r
6.
Press
N
to save the setting.
7.
Press
E
until you see the Main Menu.
8.
Turn off and then turn on the printer to initialize the scanner.
The scanner beeps on initialization. Now, you need to
configure the scanner.
C-4
Configuring the System