Filter
Top Products
2
3. Press Enter/Pause to select the internal port. After setting the port to
internal, change the mode to enable bi-directional communications.
4. Press or until you see
PARALLEL COMM
Mode
5. Press Enter/Pause. You will see
MODE
Compatible
6. Press to display the other option, IEEE1284, and press Enter/Pause.
This selects IEEE1284 for bi-directional Ethernet communications.
(Compatible mode is used with a computer connection and a parallel
cable.) Set the Port to “External” if you want to use the parallel port.
Note: Turn the printer off and back on after changing the parallel port
communications mode so the printer can initialize with the new port
setting.
Test Button
(not all models have a Test button)
Ethernet Port
Parallel Port
Serial Port
Antenna