Filter
Top Products
7/21/98 Using Radio Cards 3-1
USING RADIO CARDS
You can use a radio card with the appropriate device drivers to
enable a printer to run radio-frequency (RF) communications, which
allow the printers to use wireless radio networks. The card goes in the
printer’s PC-card slot.
Following are the available radio cards:
♦ Aironet 3000 (U.S./Canada)
♦ Aironet 3500 (U.S./Canada)
♦ Aironet 2.4 (U.K., France, Germany, and Australia)
♦ Symbol 2.4 100mW and 500mW (U.S./Canada)
♦ Symbol 2.4 (U.K., France, and Germany)
♦ Symbol 902 Mhz (U.S.)
♦ Proxim 2.4 (U.S./Canada, U.K., France, and Germany)
Configuring Radio Cards
The following procedure describes how to configure radio cards. Refer
to the Programmer’s Manual for more information.
1.
From the diskette that came with the SDK, gather the files for your
radio card.
3