Filter
Top Products
4 of 7
ISSUED: 07-11-06 SHEET #: 055-9462-1
Suspended Ceiling Application
1
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard-
ware and components.
WARNING
Note: If flush mount tube has been installed in suspended ceiling mount, remove it before proceeding with this step.
From the bottom up, thread extension column (EXT 006, not included) up through retaining collar in adjustable collar
mount plate. Align notch in extension column with hole in collar and fasten using M5 x 10 mm security screw as
shown in detail 1.
continue to extension column application on page 5 for attachment of projector enclosure...
DETAIL 1
FLUSH MOUNT TUBE
CEILING MOUNT
M5 X 10 MM
SCREW