Pelco C2410M-H Switch User Manual


 
16 C2462M-B (10/05)
REINSTALL THE DOME
DOME LINER INSTALLATION
If the unit is supplied with a dome liner, reinstall the liner before installing the bubble. To install the
liner refer to Figure 13 and do the following:
1. Align the studs located on the camera module with the clips on the liner.
2. Lightly pinch the sides of the liner, opposite from the clips, and place clips over the studs.
3. Once the liner is secure, position the viewing window of the liner over the lens of the camera.
4. Install the bubble.
Figure 13. How to Install the Dome Liner
Figure 14. How to Install the Bubble
BUBBLE INSTALLATION
To install the bubble refer to
Figure 14 and do the following:
1. Align the standoffs of the
bubble with the slots of the
back box.
2. Turn the bubble clockwise,
until it locks in place.