Filter
Top Products
10 C1679M (1/06)
REAR PANEL
Connections to the FT8301A transmitter and FR8301A receiver are made to the rear panel of the
modules (refer to Figure 3).
Figure 3. Rear Panel of FT8301A Transmitter and FR8301A Receiver
NOTE: The FT8301A transmitter/FR8301A receiver provides two video connectors: one UTP
connector and one BNC connector. Only one of the connectors can be used at one time.
For additional information about rear-panel connections, refer to the Installation section.
ᕡ RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of rack-
mounted module
ᕢ STANDALONE POWER CONNECTOR, 2-pin connector for power connection of standalone
module; removable mating connector with screw terminals (not shown)
ᕣ
FIBER OPTIC CONNECTOR, ST or FC (dependent on FT8301A/FR8301A model)
ᕤ UTP (UNSHIELDED TWISTED PAIR) CONNECTOR, 100-ohm differential analog video input
(FT8301A)/output (FR8301A); 2-pin connector; removable mating connector with spring-cage
terminals (not shown)
ᕥ
BNC CONNECTOR, 75-ohm analog video input (FT8301A)/output (FR8301A)
+
-
1
ᕡ
ᕣ
ᕤ
ᕥ
ᕢ
+
-
1
ᕣ
ᕡ
ᕤ
ᕥ
ᕢ
FT8301A
TRANSMITTER
FR8301A
RECEIVER