Filter
Top Products
Pelco Manual C558M (3/96) 5
5.1 SWITCHER/CONTROLLER
The transmitter switcher/controller is housed in a 1-3/4"
high enclosure, supplied as either a desk top unit (CZ
suffix) or as a rack mount unit (PZ suffix). Up to eight
video BNC connector inputs are available on the rear of
the unit. Any of these video inputs are switch selectable,
one at a time, to the available monitor and, while
selected, coax control functions for the pan/tilt and
camera are enabled.
5.0 OPERATION
In general, all operating controls on the transmitter are
self explanatory. With the exception of the ON/OFF
power switch and the 8-position joystick, all controls
are center-off, spring return paddle switches (momen-
tary on-off-on).
5.1.1 Controls
Power ON/OFF Rocker switch
Pan/Tilt 8-position joystick
Zoom Paddle switch Tele/Wide
Focus Paddle switch Near/Far
Iris Paddle switch Open/Close
Aux 1,2 Paddle switch Auto/Manual
Iris (latching function)
Camera Power Paddle switch On/Off (latching
function)
Pan Auto/Man Paddle switch Manual/Auto
(latching function)*
Aux 3, 4 Paddle switch (momentary
functions)*
*External requirements are needed for operation
Figure 5. MPT9008PZ/CZ–Homing/Looping Configuration