Filter
Top Products
2 PELCO Manual C410M — 9/94
4.0 INSTALLATION
To install the sun shroud, perform the following steps:
1. Unclamp the enclosure lid and remove.
2. Remove the six (6) screws from the enclosure
lid.
3. Align the screw holes in the sun shroud and en-
closure lid.
Note: The sun shroud can be aligned in
either direction and fits over the top of the
enclosure and vent cap(s).
4. Install the screws with the spacers as illustrated
in Figure 1 and tighten.
Figure 1. Sun Shroud Assembly Diagram